Platform Elevator Maintenance Methods

Feb 13, 2026 Leave a message

Routine Inspection

Appearance Inspection: Before daily use, carefully inspect the elevator car, landing doors, door frames, and other exterior parts to ensure there is no damage, deformation, or scratches. Pay special attention to the tightness of the landing doors to prevent loosening or deformation from affecting the normal opening and closing of the elevator doors and causing safety hazards.

Operational Status Inspection: During elevator operation, listen for any abnormal noises, such as harsh friction or impact sounds, which may indicate insufficient lubrication of the guide rails or the presence of foreign objects. Also, observe whether the elevator's operating speed is smooth, without any jamming or shaking, and whether the leveling accuracy meets standards to ensure the safety of users entering and exiting the elevator.

Lighting and Ventilation Inspection: Good lighting and ventilation are crucial for elevator comfort. Check daily that the elevator lighting equipment is bright and undamaged, and that the ventilation equipment is functioning properly to provide users with clear visibility and a good air environment.

 

Regular Cleaning:

Car Interior Cleaning: Perform a thorough cleaning at least once a week. Wipe the car walls, handrails, control panel, etc., with a damp cloth. Pay special attention to cleaning the buttons to prevent dust accumulation that could lead to malfunction. Regularly replace carpets or floor mats to keep the floor clean and prevent debris from entering elevator gaps.

Landing Door and Door Frame Cleaning: Clean landing doors and door frames monthly using detergent and a damp cloth to remove oil and dust. Also check the sealing strips for damage; replace any damaged ones promptly to ensure a tight seal and prevent dust and moisture from entering the elevator shaft.

Machine Room Cleaning: As the core control area of ​​the elevator, the machine room should be kept clean and dry. Perform a thorough cleaning quarterly, removing dust and debris to ensure the equipment is free of dust accumulation. Also check the machine room's ventilation, temperature, and humidity; install air conditioning or dehumidifiers if necessary.

 

Lubrication and Maintenance:
Guide Rail Lubrication: Lubricate the guide rails every six months using specialized guide rail lubricant to reduce friction between the car and guide rails, lower noise, and extend service life.

Wire Rope Lubrication: Lubricate the wire ropes annually using specialized wire rope lubricant to prevent rust and wear, and improve flexibility and strength. Lubrication of other rotating parts: According to the equipment manual, lubricate rotating parts such as traction machine bearings and speed governor wheel axles regularly to ensure normal operation.